November 17, 2016, 10:33 am
Author:
toman311
Posted: Thu Nov 17, 2016 7:33 pm (GMT+1)
Thanks for the reply.
I am not seeing that button. I attached a screen shot showing my options.
It appears you are working off of a UK version according to your signature beneath your post. I am working off of the USA version, so I guess that is why we're getting different options. Sadly, I don't see that button...
I don't think it is anywhere else either, but maybe I am wrong. I wonder what other people do to get around this issue.
_________________
ArchiCAD 20, 4012 USA FULL
-Macintosh HD OS X El Capitan, 3.2 GHz Intel Core i5, 8 GB Memory, NVIDIA GeForce GTX Graphics
↧
November 17, 2016, 4:33 pm
Author:
Barry Kelly
Posted: Fri Nov 18, 2016 1:33 am (GMT+1)
Is it a Graphics Override setting?
I haven't played around with that much yet but it appears you have the pen thickness from one pen but the colour from another.
Barry.
_________________
Versions 6.5 to 20
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision M6800 - i7 4700MQ @ 2.40GHz, 16GB RAM, AMD FirePro M6100 (2GB), Windows 7 64bit
↧
↧
November 17, 2016, 6:50 pm
Author:
Soon_to_be
Posted: Fri Nov 18, 2016 3:50 am (GMT+1)
Hi All,
I'm on the search for a sliding door in AC 19 that allows you to have 1(or more) sliding panels without needing a fixed panel. This would allow me to have a concealed bank of doors hidden behind walls + a residential lift door
↧
November 17, 2016, 9:45 pm
Author:
Tsepov
Posted: Fri Nov 18, 2016 6:45 am (GMT+1)
Its work!
Catname = ""
Catcode = ""
QW= REQUEST("Zone_Category", "", Catname, Catcode)
PARAGRAPH "NAMECAT" 2, 0, 0, 0, 1
""+Catname
ENDPARAGRAPH
TEXTBLOCK "CAT" 0, 5, 0, 1, 1,1,"NAMECAT"
RICHTEXT2 0, 1, "CAT"
SL_GDL, many thanks for the help!
_________________
ArchiCAD - The Best!!!
↧
November 17, 2016, 9:48 pm
Author:
Barry Kelly
Posted: Fri Nov 18, 2016 6:49 am (GMT+1)
Search for a 'pocket' door in your library or in BIMComponents.
Barry.
_________________
Versions 6.5 to 20
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision M6800 - i7 4700MQ @ 2.40GHz, 16GB RAM, AMD FirePro M6100 (2GB), Windows 7 64bit
↧
↧
November 17, 2016, 9:55 pm
Author:
Soon_to_be
Posted: Fri Nov 18, 2016 6:55 am (GMT+1)
I hadn't actually thought about pocket door. But after a quick look, I'm restricted to 1 panel and the double door splits the panel ![Crying or Very sad]()
BIMComponents? Do you mean the IFC Items?
↧
November 17, 2016, 10:26 pm
Author:
Barry Kelly
Posted: Fri Nov 18, 2016 7:26 am (GMT+1)
| Soon_to_be wrote: |
I hadn't actually thought about pocket door. But after a quick look, I'm restricted to 1 panel and the double door splits the panel ![Crying or Very sad]()
|
I am not sure if there is an option to slide 2 panels one way.
The USA double door says it is 'double or converging'.
I finally downloaded it but can't see an option to slide both panels in the same direction.
| Soon_to_be wrote: |
| BIMComponents? Do you mean the IFC Items? |
You can search the on-line BIMComponents portal (see image) through the object (door) settings dialogue.
You may just get other versions of what you have in the library but sometimes something new pops up.
I am getting an error when I try to download this way but you can go to the website and download from there ... https://bimcomponents.com/Search/pocket
It is very slow to download though.
Barry.
_________________
Versions 6.5 to 20
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision M6800 - i7 4700MQ @ 2.40GHz, 16GB RAM, AMD FirePro M6100 (2GB), Windows 7 64bit
↧
November 18, 2016, 3:16 pm
Author:
4thorns
Posted: Sat Nov 19, 2016 12:16 am (GMT+1)
Hi all. My colleague asked me today if there was a fix for this yet. (see links below) I told him that I could make Excel prompt him when it happens but I was hoping I could prompt him in AC before he sent the schedule to Excel. I was messing around with the lengths of the fill object and found this.
Working in decimal inches in plan, I found that the schedule would display 2'-12" if I manually typed in a length from 23.993" to 23.999".
One thought that occurred to me was the cursor snap range. Is it possible for a larger range to create this situation?
As far as a workaround, is there a way to have the script round up the A parameter to the nearest sixteenth of an inch based on these few thousandths of an inch? If nothing else then if the script could determine if A is within this range then maybe I could have it change the fill to alert the user.
Not sure if any of this will help create a fix but figured I'd share.
My post:
http://archicad-talk.graphisoft.com/viewtopic.php?p=258122&highlight=schedule#258122
Steve Jepson's post:
http://archicad-talk.graphisoft.com/viewtopic.php?p=260262&highlight=312#260262
Doug
_________________
Doug Thornton
AC 19 Dell XPS , 8G Ram
↧
November 19, 2016, 10:02 am
Author:
ARGAS
Posted: Sat Nov 19, 2016 7:02 pm (GMT+1)
Dear all,
I've encountered odd problem, regarding wallhole ID. I made a special window, based on libraries, and wanted to make niche (like in real building I surveyed), but I got errors with wallniche id and also with normal clean opening. In 3D it looks really nice, but in layout it s*cks. Please help.
Karol
_________________
Karol Argasiński | ARGASprojekt
www.argasprojekt.pl
AC 19 PL •
Dell M6800 i7 4810MQ 2.80 GHz •
32 GB RAM •
Quadro K3100M •
Windows 10 Pro
↧
↧
November 19, 2016, 10:04 am
Author:
ARGAS
Posted: Sat Nov 19, 2016 7:04 pm (GMT+1)
In 3D looks good.
_________________
Karol Argasiński | ARGASprojekt
www.argasprojekt.pl
AC 19 PL •
Dell M6800 i7 4810MQ 2.80 GHz •
32 GB RAM •
Quadro K3100M •
Windows 10 Pro
↧
November 19, 2016, 10:06 am
Author:
ARGAS
Posted: Sat Nov 19, 2016 7:06 pm (GMT+1)
Window opening in 2D looks bad (not bad as wallniche, but still bad)
_________________
Karol Argasiński | ARGASprojekt
www.argasprojekt.pl
AC 19 PL •
Dell M6800 i7 4810MQ 2.80 GHz •
32 GB RAM •
Quadro K3100M •
Windows 10 Pro
↧
November 20, 2016, 12:53 pm
Author:
4thorns
Posted: Sun Nov 20, 2016 9:53 pm (GMT+1)
Well, this is what I came up with. (see below) I put this in the parameter script and it seems to work fine. I'm glad I only had to go to 18'! Which leads me to another question. This is the only way I could think to script it. Is there another way that requires fewer lines of script? A condensed version maybe. It's done so I guess it doesn't matter but just wondering for future reference.
Thanks,
Doug
PS. Now it's time to grab a cold one and watch the race!!
PARAMETERS PLAN_FILL = 16
IF A > 11.992" AND A < 12" THEN !SHORT OF 1'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 23.992" AND A < 24" THEN !SHORT OF 2'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 35.992" AND A < 36" THEN !SHORT OF 3'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 47.992" AND A < 48" THEN !SHORT OF 4'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 59.992" AND A < 60" THEN !SHORT OF 5'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 71.992" AND A < 72" THEN !SHORT OF 6'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 83.992" AND A < 84" THEN !SHORT OF 7'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 95.992" AND A < 96" THEN !SHORT OF 8'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 107.992" AND A < 108" THEN !SHORT OF 9'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 119.992" AND A < 120" THEN !SHORT OF 10'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 131.992" AND A < 132" THEN !SHORT OF 11'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 143.992" AND A < 144" THEN !SHORT OF 12'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 155.992" AND A < 156" THEN !SHORT OF 13'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 167.992" AND A < 168" THEN !SHORT OF 14'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 179.992" AND A < 180" THEN !SHORT OF 15'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 191.992" AND A < 192" THEN !SHORT OF 16'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 203.992" AND A < 204" THEN !SHORT OF 17'
PARAMETERS PLAN_FILL = 21
ENDIF
IF A > 215.992" AND A < 216" THEN !SHORT OF 18'
PARAMETERS PLAN_FILL = 21
ENDIF
_________________
Doug Thornton
AC 19 Dell XPS , 8G Ram
↧
November 20, 2016, 3:33 pm
Author:
Soon_to_be
Posted: Mon Nov 21, 2016 12:33 am (GMT+1)
Thanks Barry. Yes I've had errors with downloading it via object settings dialog box as well. Do you or anyone know if we can have more than 1 door panel for an 'Exterior Sliding Door 19'?
↧
↧
November 21, 2016, 12:37 am
Author:
Gergely Feher
Posted: Mon Nov 21, 2016 9:37 am (GMT+1)
| 4thorns wrote: |
Is there another way that requires fewer lines of script? A condensed version maybe. It's done so I guess it doesn't matter but just wondering for future reference.
|
I would try something like this:
| Code: |
_a = A - INT(A/12") * 12"
if _a > 11.992" and _a < 12" then
plan_fill = 21
parameters plan_fill = plan_fill
endif |
_________________
_________________
Gergely Fehé
r
Team Leader, Library Team
GRAPHISOFT SE
↧
November 21, 2016, 10:06 am
Author:
fuzzytnth3
Posted: Mon Nov 21, 2016 7:06 pm (GMT+1)
No Graphic Overrides applied. Also you can see in the dialogue box the "Pen" colour box has disappeared and I think it has allocated one of the blank squares in the Pen Set which you can not use normally for the custom pen.
_________________
AC versions 3.41 to 20 (4012 UKI Full)
Mac OSX 10.10.5 Mac Pro-2013 32gbRam AMD FirePro D500 3072 MB graphics
↧
November 22, 2016, 11:39 am
Author:
Joseph Henry
Posted: Tue Nov 22, 2016 8:39 pm (GMT+1)
How can I create this as three separate windows? See attachment. (Archicad 20)
↧
November 22, 2016, 12:16 pm
Author:
s2art
Posted: Tue Nov 22, 2016 9:16 pm (GMT+1)
Do you have Cadimage windows? They can have arched heads. The attached image shows a quick example, but you can view in elevation and stretch node points to get the curve absolutely right. Not entirely sure if the schedule would dimension the curves though.
_________________
S t u a r t . R o s e
LAD Architecture
AC19 5005 NZE
HP Envy Notebook + 27"
Intel i7-6500 2.5GHz, 16GB RAM, Windows 10
↧
↧
November 22, 2016, 1:52 pm
Author:
bimlab
Posted: Tue Nov 22, 2016 10:52 pm (GMT+1)
Hi&Hello.
I was playing with COONS function to achieve patch that has invisible boundary edges.
Masking parameter that controls visibility looks like this:
| Code: |
| mask = 4*j3 + 8*j4 + 16*j5 + 32*j6 + 64*j7 |
where jn = 1 or0
When turning off each edge (j) it works fine but suprisingly when all "j" = 0 patch is still showing all 4 boundary edges (see attached fig.)
Have Anyone idea why?
Thanks
↧
November 22, 2016, 2:05 pm
Author:
Joseph Henry
Posted: Tue Nov 22, 2016 11:05 pm (GMT+1)
I don't know what cadimage windows is...looks like what I want though. Do you have more details on how to get what you're showing me? Thanks so much!
↧
November 22, 2016, 2:53 pm
Author:
s2art
Posted: Tue Nov 22, 2016 11:53 pm (GMT+1)
Cadimage is a company which (among other things) produces add-ons for Archicad, one of which is for doors and windows. Their website HERE. They're not cheap, but doors and windows in particular are very versatile. I have not used a standard AC window in years.
_________________
S t u a r t . R o s e
LAD Architecture
AC19 5005 NZE
HP Envy Notebook + 27"
Intel i7-6500 2.5GHz, 16GB RAM, Windows 10
↧
